Inlet Louvres

CL-100 Cellular Inlet Louvers

CL-100 Cellular Inlet Louvers will enhance your tower by:-

• Improving air flow into the cooling tower
• Prevent debris from entering
• Eliminate water splash-out
• Restrict sunlight entering the tower (to impede algae growth)
• Reduce noise from the tower
• Improve the tower's appearance.

Applications

SDS CL-100 Cellular Inlet Louvers are suitable for new and retrofit applications, including air inlets for both package and field-erected counterflow and straight-sided crossflow towers, fresh air make-up systems, and air pollution control scrubbers.

Features and benefits

• Constructed entirely of CTI Standard 136 PVC, for its durability, weather-resistance, and self-extinguishing fire characteristics
• Because of their cellular 'baffle' design and black colour, CL-100 modules significantly block sunlight (70:1 light reduction).
• Promotes algae growth on the interior surfaces of the cooling tower system. This reduces the cost of algae-removal chemicals and labour and allows the tower to operate more efficiently.
• The CL-100's baffle design also reduces noise leaving the tower through the louver modules by 3 decibels.
• Proprietary, engineered cellular baffling restricts splash-out, light, weather, and noise but still achieves very low pressure drop results.
• Convenient, pre-assembled modules are 1 ft (305 mm) wide, 2.5 inches (63.5 mm) deep, and available in lengths from 1 ft (305 mm) to 10 ft (3050 mm).
• To make installation easier and to allow easy access for cleaning and maintenance, the optional CL-100 Assembly houses multiple CL-100 modules in a single extruded PVC 'frame' with mounting flanges available on 1, 2, or all 4 sides.